Filter
Top Products
ASUS P2B-D2 User’s Manual 19
3. Central Processing Unit (CPU)
This motherboard provides two CPU Slot 1s for Pentium II processors packaged in
SEC cartridges.
Pentium II Processor
You should check to see that you have the following items:
Lock Holes
Captive Nut
CPU
III. INSTALLATION
III. INSTALLATION
WARNING! Be sure that there is sufficient air circulation across the processor’s
heatsink by regularly checking that your CPU fan is working. Without sufficient
circulation, the processor could overheat and damage both the processor and the
motherboard. You may install an auxiliary fan, if necessary.
Two Pentium II Retention Mechanisms Two Attach Mount Bridges
(factory installed)
Heatsink Support Base/Top Bar
Pentium II Processor Heatsink
The recommended heatsinks (see section on recommended heatsinks for more in-
formation) for the Pentium II processor are those with three-pin fans that can be
connected to the fan connectors on the motherboard.
(8)
Heatsink bottom Groove
for the Support Top Bar
Larger Fin should
be on the bottom.
Top Bar (4)
Base (7)
Posts
Pin
(5)
(6)
Other Important Items
ASUS C-P2T PC100 CPU Termination Card
Intel Pentium II Processor in an SEC cartridge