Filter
Top Products
ASUS P2B-D2 User’s Manual96
IBM OS/2
6. Type the following:
RSPDSPI /PK:VGA /SK:NONE /S:E:\OS2SE21\ /T:C:
In /T:C:, C: is the target drive where OS/2 is installed. In /S:E:, E: is the source
CD-ROM or LAN drive. Then press Enter.
7. Perform a shutdown and restart your computer.
• If you are installing this driver on OS/2 Warp 3.0, do the following:
1. Restart your computer.
2. Simultaneously press Alt and F1 key immediately when a square block appears
in the top left hand corner.
3. Press 'v' key for VGA.
• If you are installing this driver on OS/2 Warp (Merlin) 4.0, do the following:
1. Restart your computer.
2. Simultaneously press Alt and F1 key immediately when a square block appears
in the top left hand corner.
3. Press F3 key for VGA.
IBM OS/2
A. VGA Driver