Filter
Top Products
ASUS P2B-D2 User’s Manual86
WINDOWS NT 4.0
Updating the FMS Driver under Windows NT v4.0
Follow these instructions only if Windows NT v4.0 is already installed.
1. Click the Start button on the Winows NT task bar, and point to Settings.
2. Open the Control Panel, double-click SCSI Adapters.
3. Select the Drivers tab, and click Add.
4. In the Install Driver window, click Have Disk.
5. Insert the ASUS P2B-D2 CD.
6. At the Copy manufacturer's files from text box, type
E:\SCSI\WINNT\4_0 (Where E
is your CD-ROM drive), and click OK.
7. At the Install Driver window, select the driver, Adaptec AHA-294xU2/295xU2/
AIC-789x PCI Ultra2 SCSI Controller [NT4.0], and then click OK.
8. In response to "Do you want to use the currently installed driver(s) or install
new one(s)", select New.
9. Again type
E:\SCSI\WINNT\4_0 and click Continue. The driver is now installed.
10. You must restart your computer for the changes to take effect. Click Ye s to re-
start your computer. Click No to return to the SCSI Adapters window.
WINDOWS NT 4.0
D. AIC-7890 Driver