Filter
Top Products
Appendix
93
IP Address Determination
The
SN0108 / SN0116’s default setting is t
o obtain its IP address automatically
from a DHCP server
. When the SN0108 / SN0116 starts, it waits to get an
address from a DHCP server. If, after one minute, it fails to obtain an address
from the DHCP server, it reverts to its default IP address of 192.168.0.60.
If you are an administrator and need to determine the SN0108 / SN0116’s IP
address, or want to assign it one, there are three methods to choose from. In
each case, your computer must be on the same network segment as the SN0108
/ SN0116.
Method 1:
For computers running Windows, an IP address can be determined and/or
assigned with the IP Installer utility:
1. Open the IPInstaller directory on the Software CD that came with your
PN9108 package and run IPInstaller.exe. A dialog box similar to the one
below appears:
:
2. Select the SN0108 / SN0116 in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The SN0108 / SN0116's MAC address
is located on its bottom panel.