Filter
Top Products
SN0108 / SN0116 User Manual
76
Target List
The left side panel displays all the devices that were found with the
Enumeration function, as well as any devices that were manually added with
the Target Information fields.
Note: Double clicking an item in the list invokes the same function as
selecting Enum Ports–which displays the numbers and working modes
of the selected target’s ports in the Port List column.
If a device was automatically listed as a result of the Enumeration
procedure, the icon to its left is drawn with green dots and lines to show
that the target is on line and is ready to be mapped.
If a device was added to the list manually and is off line, the icon to its left
is drawn with black dots and lines. Double clicking a manually added item
can get some information and display it in the Port List, but the working
mode information is not accurate and we must assume that all the device’s
ports are in Virtual Port mode. See Operating Mode, page 35 for details
about port modes.
If the target is off line or is on line but does not respond within 2 seconds
of asking to enumerate its ports, the working mode information is not
accurate and we must assume that all the device’s ports are in Virtual Port
mode. See Operating Mode, page 35 for details about port modes.