Filter
Top Products
Chapter 4. Administration
29
Date / Time
The Date / Time function allows you to set the SN0108 / SN0116's
date and time. When you click the Date / Time icon, the following
dialog box appears:
The date and time that the SN0108 / SN0116 is currently set to appear in the
upper section. The large middle section offers three methods to set new date
and time parameters:
Synchronizing the date and time with your computer's date and time
Setting the date and time manually
Synchronizing the date and time with the date and time of an NTP server
on the internet
Note: 1. If you enable Synchronize with computer time, the Date and Time
fields are filled with the date and time settings of your computer.
2. If you enable Set Manually, key in the Date and Time in the
corresponding fields.
3. If you enable Synchronize with NTP server, select the time zone
that corresponds to the SN0108 / SN0116's location from the list
box in the Time Zone panel. If you are behind a firewall, you must
enable a port for the NTP server.
Click Save to save your changes.