AT&T 518-455-317 Time Clock User Manual


 
Caller ID information is displayed if you Join a call; however, you cannot join
a call at any extension that has Privacy activated.
Caller ID information is displayed if users pick up calls with Direct Line
Pickup—Active Line, Call Pickup, or Group Pickup, but the restrictions
stated previously apply.
For incoming calls, Caller ID information displays only when a call is audibly
alerting at an extension. This means that extensions with Do Not Disturb
activated or extensions that have lines with Line Ringing set to No Ring do
not receive Caller ID information. However, Caller ID information is
displayed once the call is answered or if the line is preselected.
Considerations
Subscriptions to Caller ID service are on a per-line basis.
The lines associated with Caller ID must be connected to a line jack on a
206EC or 400EC module. For more information, refer to the PARTNER II
Communications System Installation guide.
Caller ID information is passed to an extension between the first and second
ring. To receive Caller ID information, wait until the second ring before
answering the call.
Not all calls on Caller ID lines will be displayed. This varies by local phone
company. When Caller ID information is not captured, the system date and
day (default) displays.
The incoming telephone number replaces the system date and time display
on system phones. An out-of-area message
("------------")
displays if a
call is being dialed from a region that does not support Caller ID. A private
message (“Priv”) displays if the caller has blocked transmission of Caller ID
information.
If you use SMDR, telephone numbers of incoming calls print on call reports
after the call is completed. (Private and out-of-area numbers are reported
as “IN” on call reports.)
5-32
Caller ID