Filter
Top Products
Valid Entries
1 =
2 =
3 =
Assigned (for hunting to groups 1–6, or to group 7 for the voice messaging
system’s Automated Attendant Service)
Not Assigned ✔
VMS Line Cover (available only for Hunt Group 7)
Programming
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 6 ].
2.
At the
Group:
prompt, enter a group number (1–6; 7 for the voice messaging
system). For example, to select group 1, press [ 1 ].
3.
At the Line: prompt, enter the line to be programmed. For example, to
select line 1, press [
0
] [
1
].
4.
To assign or remove a line for groups 1–6, or to assign or remove a line or use
VMS Line Cover for group 7, press [
Next Data ] until the appropriate value
displays.
5.
At this point:
■
■
To program another line, press [ Next Item ] or [ Prev Item ] until the line
number shows on the display. Then repeat Step 4.
To program another group, press [
Next Procedure ] [ Prev Procedure ], enter a
new group number, and repeat Steps 3 and 4.
6.
Select another procedure or exit programming mode.
5-74 Group Call Distribution (#206)