Filter
Top Products
Doorphone Alert Extensions (#606)
Description
This System Programming procedure identifies up to 48 extensions to signal
when a doorphone button is pressed. When a person uses the doorphone, it
signals all alert extensions at the same time. If the alert extension is a system
phone, the call signals with a unique ding-dong sound to distinguish it from
other calls. Additionally, if you have two doorphones, they signal with different
tones so you can distinguish between them.
Related Features
You must use Doorphone Extensions (#604 and #605) to identify the
extensions to which doorphones are connected.
If Do Not Disturb is active at a doorphone alert extension, the person at the
doorphone hears signaling, but the alert extension is not signaled.
■
■
Considerations
You cannot bridge two doorphones together.
Valid Entries
1 = Not an Alert Extension ✔
2 = Doorphone 1 Alert Extension
3 = Doorphone 2 Alert Extension
4 = Doorphones 1 and 2 Alert Extension
Programming
To identify doorphone alert extensions:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 6 ]. The
display reads:
DoorPhneAlert
Extension:
2.
Enter the first alert extension number (10–57). For example, to identify
extension 10, press [
1
] [
0
].
3.
To change the alert status, press [
Next Data ] until the appropriate value
displays.
4.
To identify another alert extension, press [
Next Item ] or [ Prev Item ] until the
extension number shows on the display. Then repeat Step 3.
5.
Select another procedure or exit programming mode.
Doorphone Alert Extensions (#606)
5-59