Filter
Top Products
Maintenance
Issue 1 — December 2002
DEFNETM.PDF — Avaya CT 1.2
3-12
Suspend/Resume Alarms Command
The Suspend/Resume command is used to suspend or resume switch alarms for
a given link. See Figure 3-9. Suspend the switch alarms if you are working on the
switch link (or associated G3PD/server) and do not want to report an error if the
Tserver connection is lost.
Figure 3-9. Suspend/Resume Alarms Dialog Box
NOTE:
The G3PD will automatically activate alarms 4 minutes after being loaded.
If you were to suspend the alarms on switch Link 7 and select "OK", the Results
screen, as shown in Figure 3-10, would be displayed on the client.