Filter
Top Products
Troubleshooting
Issue 1 — December 2002
4-5DEFNETM.PDF — Avaya CT 1.2
Not All Events Received by Application
For example, a user receives a call, but the application does not notify the user.
1. Start the tracing utility program for the client (TSspy) to see if the event is
being sent to the application. If it is, then there is a problem with the
application. If not, check the error log on the Tserver for possible problem
explanations.
2. Verify that the DEFINITY ECS G3 administration settings are correct for the
DEFINITY LAN Gateway connections; refer to Appendix B, "Administering
CTI LInks for DEFINITY G3PD" in Avaya Computer Telephony Installation
Guide.
3. On the switch, verify the ASAI station settings are correct:
TEI fixed? y
TEI 3
CRV Length 2
MIM n
XID y
Event minimization n
NOTE:
Event Minimization should be set to "n" on the switch for the Basic
Rate Interface (BRI) link connected to the G3PD.
4. If the problem persists, report to Services.
Slow Performance
Check the Tasking options on your Windows NT machine: from the Main program
group, select "Control Panel" and then "System". In the System dialog box,
select "Tasking", and then select "Foreground and Background Applications
Equally Responsive."
Slow performance is usually caused by insufficient memory. You must reduce the
number of applications running on your server, reduce the load on the server,
reconfigure G3PD memory usage by running the G3 PBX Driver Configuration
Utility (refer to ‘‘Tunable G3PD Configuration Parameters’’ in Chapter 2), add
more memory, or consider moving to a faster processor.
G3PD Stops Responding
Open the DEFINITY G3PD Administrator utility’s Maint menu and look at the Link
Status dialog box to verify the current state of the G3PD. See the ‘‘Link Status
Command’’ section in Chapter 3. If the link status is "Talking", use the Test