Filter
Top Products
Chapter 6 CLI – Layer 2
Avaya P332MF User’s Guide 43
•show port self-loop-
discovery
Displays which port or switch has an
enabled IBM™ token ring cable loop
discovery status.
Page 57
•show internal
buffering
Shows the current internal buffering
capacity.
Page 57
• show boot bank Displays the software bank from which
the switch will load.
Page 58
• show module Shows switch status and information. Page 58
•show port
flowcontrol
Shows the per-port status information
related to flow control.
Page 60
• show cam Shows the CAM table entries for a
specific port.
Page 62
• show cascading fault-
monitoring
Shows cascading fault monitoring mode. Page 62
•show port auto-
negotiation-
flowcontrol-
advertisement
Displays the flowcontrol advertisement
for a Gigabit port when performing
autonegotiation.
Page 63
• show trunk Displays VLAN tagging information of
the ports, port binding mode, and the
port VLAN ID.
Page 63
• show vlan Displays the VLANs configured in the
stack/switch.
Page 64
• show leaky-vlan Displays the leaky VLAN status. Page 65
• show spantree Shows Spanning Tree Protocol (STP)
settings.
Page 65
• show autopartition Shows the autopartition settings. Page 67
• show dev log file Displays the encrypted device log file. Page 67
• show log Displays an encrypted device reset log. Page 67
•show module-
identity
Displays the switch’s identity. Page 68
• show license Shows the license. Page 68
• show system Shows system parameters. Page 69
• show rmon statistics Shows the traffic statistics of an interface. Page 70
• show rmon history Shows the existing history entries. Page 71
• show rmon alarm Shows the existing alarm entries. Page 71