Filter
Top Products
Chapter 6 CLI – Layer 2
Avaya P332MF User’s Guide 65
show leaky-vlan
Use the show leaky-vlan command to display the leaky VLAN status.
The syntax for this command is:
show leaky-vlan
Output Example:
P330-N> show leaky-vlan
Leaky VLAN mode Disable
show spantree
Use the show spantree command to display spanning-tree information.
The syntax for this command is:
show spantree [<mod_num>[/<port_num>]]
Output Example:
P330-N> show spantree
Spanning tree enabled
Designated Root: 00-40-0d-88-06-c8
Designated Root Priority: 32768
Designated Root Cost: 20
Designated Root Port: 1/1
Root Max Age: 20 Hello Time: 2
Bridge ID MAC ADDR: 00-40-0d-92-04-b4
Bridge ID priority: 32768
Port State Cost Priority
------ ------------- ---------- ------------
1 /1 Forwarding 20 128
1 /2 not-connected 20 128
1 /3 LAG-member 20 128
1 /4 LAG-member 20 128
1 /5 not-connected 20 128
1 /6 not-connected 20 128
etc...