Filter
Top Products
Chapter 6 CLI – Layer 2
Avaya P332MF User’s Guide 81
Privileged Level Commands
Following is a table of the Privileged Level commands. This level includes all the
commands from the User Level described above (see the User Level Commands
Section for a description of these common commands).
• no hostname Returns the prompt to its default. Page 82
• no rmon history Deletes an existing history entry. Page 82
• no rmon alarm Deletes an existing alarm entry. Page 82
• no rmon event Deletes an existing event entry. Page 83
• hostname Displays or sets a new prompt. Page 83
•clear
1
Clears current settings
(a group of commands).
Page 83
•set
2
Sets the switch parameters
(a group of commands).
Page 88
• sync time Synchronizes the time between switches. Page 118
• get time Gets the time from the time server. Page 123
• reset Restarts the system or a switch. Page 124
• reset stack Causes a hardware reset to the stack. Page 124
• reset mgp Causes a software reset to the Media
Gateway Processor.
Page 124
• nvram initialize Initializes the NVRAM to its factory
defaults.
Page 125
• rmon history Creates a history entry. Page 126
• rmon alarm Creates an alarm entry. Page 127
• rmon event Creates an event entry. Page 128
•copy stack-config
tftp
Uploads stack configuration to a file
(using TFTP). The file must exist before
you Upload.
Page 128
•copy module-
config tftp
Uploads switch configuration to a file
(using TFTP). The file must exist before you
Upload.
Page 129
•copy tftp stack-
config
Downloads a stack configuration file
(using TFTP) into the device.
Page 130