Filter
Top Products
34 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
4. To enable auto discovery, select the Enable auto discovery checkbox.
5. Perform other configurations on the screen as required.
6. Click Save.
To enable and configure alerts for ports configured with CAS Profile:
1. Select Appliance Settings - Ports - CAS Profile - Default Settings - Alerts. The Alerts screen
appears.
2. To activate the alert string fields, click the Enable alert strings checkbox.
3. Enter up to ten alert strings in the fields provided.
NOTE: Special event notifications are generated when input data matches one of the alert strings.
4. Click Save.
To enable and configure data buffering for ports configured with CAS Profile:
1. Select Appliance Settings - Ports - CAS Profile - Default Settings - Data Buffering. The Data
Buffering screen is displayed.
2. Choose Enabled or Disabled data buffering from the Status checkbox.
3. Chose the type of data buffering desired from the Type drop-down menu.
4. Choose Enabled or Disabled from the Time Stamp and Login/Logout Message drop-down
menus.
5. Choose Enabled (store data always) or Disabled (store data when no CAS session is open)
from the Serial Session Logging drop-down menu.
6. Click Save.
To edit the CAS Profile parameters for one or multiple ports:
1. Select Appliance Settings - Ports - CAS Profile - Devices. The Devices screen appears with a
list of all ports that are configured with the CAS Profile. (Device is the name of the port and
Name is the configured or discovered name of the connected device.)
2. To edit multiple ports, perform the following steps.
a. Select the checkbox for each port individually or select the checkbox on the heading row
to select all listed ports. The Multi-Edit button is activated.
b. Click the Multi-Edit button. The Multi-Edit Wizard screen appears.
c. Select the checkboxes to activate configuration options for Configure CAS General
Settings, Configure Alerts Strings or Configure Data Buffering Settings.
d. Select the checkboxes in each section to enable or disable the individual options.
e. Click Next. The following screen will depend on the options selected in sub-step c above.
3. To edit one port, perform the following steps.
a. Click the port name in the Device column. The General, Alerts, Data Buffering and Power
options appear in the side navigation bar with the General option selected.