Filter
Top Products
Chapter 4: Using the Web Manager 57
6. Click Add.
7. Enter the community name for SNMP v1/v2 or the username for SNMP v3 in the Name field.
8. Enter the OID.
9. Select the desired permission from the pull-down menu. Choices are Read and Write or Read
Only.
10. If the required SNMP version is v1 or v2, click the Version v1, v2 button, then enter the source
(valid entry is the subnet address).
-or-
If the required SNMP version is v1 or v2 using an IPv6 network, click the Version v1,v2 for
IPv6 network button, then enter the source (valid entry is the subnet address).
-or-
If the require SNMP version is v3, click the Version v3 button, then select the Authentication
Type (MD5 or SHA), enter the authentication passphrase or password, enter the privacy
passphrase for DES and select the Minimum Authentication Level (Auth, NoAuth, Priv).
11. Click Save.
Date and Time
The ACS 6000 console server provides two options for setting date and time. You can set the
console server to retrieve data and time from a network time protocol (NTP) server, or in situations
where that is impractical or prohibited, you can set the time manually so that the console server’s
internal clock is used to provide time and date information.
NOTE: The Current Time displayed in the Date & Time screen shows only the time when the screen was
opened. It does not continue to update in real time.
To set the time and date using NTP:
1. Click Applications Settings - Date And Time. The Date & Time screen is displayed.
2. Select Enable network time protocol to activate the NTP server field.
3. Enter the NTP server site of your choice.
4. Click Save.
To set the time and date manually:
1. Click Applications Settings - Date And Time. The Date & Time screen is displayed.
2. Select Set manually to activate the fields used to enter date and time data.
3. Using the pull-down menus, select the required date and time.
4. Click Save.