Filter
Top Products
38 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
To configure devices with Power Profile:
1. Select Appliance Settings - Ports - Power Profile - Devices. The Devices screen appears.
2. Select a device by clicking on a device name.
3. Under Power Settings, select Auto, Avocent-Cyclades, SPC, or ServerTech from the PDU Type
drop-down menu.
4. Enable or disable the Enable speed auto detection checkbox.
5. Enter the correct number of seconds in the Polling Rate field.
6. Click Save.
To configure an outlet group for ports with Power Profile:
1. Select Appliance Settings - Ports - Power Profile- Outlet Group. The Outlet Group Add Group
screen appears.
2. Click Add. Enter the outlet group name in the Group Name field.
3. Click Save. The outlet group appears in the list on the Outlet Group screen.
4. Click the name of the outlet group. The Outlet Settings field appears.
5. Click Add.
6. To configure outlets that are on connected and configured PDU(s), perform the following
steps.
a. Select the Select PDU radio button.
b. Select the PDU from the Connected PDUs menu.
c. Enter the numbers of the outlets in the Outlet field.
7. To configure outlets from an unconnected PDU (for use after future connection), perform the
following steps.
a. Select the Custom radio button.
b. Enter a name that will be assigned to the PDU in the PDU ID field.
c. Enter the numbers of the outlets in the Outlet field.
8. Click Save.
9. Click Close.
NOTE: A user can manage outlet groups only if the user belongs to a group that is an authorized manager of the
outlets in the group.
Pluggable Devices
NOTE: Before configuring pluggable devices, you must enable PC Card and USB Device Detection in the
Appliance Settings - Security - Security Profile screen.