Filter
Top Products
Section 2: Basic Installation
18 AXIS 540/640 User’s Manual
Connecting the AXIS 540/542 to the Ethernet Network
1. Switch off the printer and disconnect the AXIS 540/542 external
power supply.
2. Note the AXIS 540/542 serial number found on the underside
label of the print server. You need this number during the
network configuration.
3. Connect your AXIS 540/542 to the network using a twisted pair
(10baseT) or thin wire (10base2) cable.
4. Switch on the printer and connect the external power supply to
the AXIS 540/542.
5. Successful connection of the AXIS 540/542 to your network will
be confirmed by the intermittent flashing of the Network
Indicator.
6. You are now ready to install your server onto your network using
one of the methods detailed in the Installation Guide, on page 20.
By commencing with the preferred installation method, you can
further verify that your AXIS 540/542 is properly connected to
your network.
Note: ❏ Each AXIS 540/542 Print Server is pre-configured with a unique
Node Address that is identical to the serial number. This can be
changed using the AXIS NetPilot, or any standard Web browser,
if required.