Filter
Top Products
Section 7: Setting Up - UNIX
AXIS 540/640 User’s Manual 77
Adding Strings Before
and After Print Jobs
These string functions provide a way to send printer control
commands before and after each print job. They may be specified
individually for each logical printer.
All strings are entered as hexadecimal byte values.
Example 1:
Assume that the logical printer PR5 is configured as a PostScript
printer. To append the PostScript End of File character
(Ctrl-D, hex
04) after each print job, edit the following entry in
your config file:
Example 2:
You have an HP LaserJet printer with dual input bins, and want
to print on pre-printed forms when using the logical printer PR4.
The standard forms are taken form bin 1, and the pre-printed
forms are taken from bin 2. The strings before and after print jobs
should then contain commands to select bin 2 (
E
C
&l4H) and
bin 1 (
E
C
&l1H) respectively. Edit the following entries in your
config file:
PR5_AFT. : 04
PR4_BEF. : 1B 26 6C 34 48
PR4_AFT. : 1B 26 6C 31 48