Filter
Top Products
Appendix B: The Parameter List
AXIS 540/640 User’s Manual 99
The Config File
The remainder of this appendix contains the complete AXIS 540/640
parameter list. The left-hand column shows the parameters and their
default values as they appear in the config file, and the right column
contains brief descriptions of the parameters.
Most parameters will take effect in the print server for the next
incoming print job after being changed. However, those parameters
marked (Requires Restart), will require the print server to be restarted
before the new parameter setting can take effect. Restart is also
required when the Ring Speed Switch is changed on the AXIS 640.
Please note that the password relates to parameters, e.g. ROOT_PWD
and PROS_PWD will only be shown when logged in as root, i.e. not
when printing the parameters using the Test button.
--- CONFIG MENU
NODE_ADDR. : 00 40 8C 10 00 86
Node Address
BASE URL. : WWW.AXIS.COM
Default Base URL Address (AXIS 540+/640+ only)
ROOT_PWD. : pass
Root Password
USERS. :
User Authority and Printer Access
S_ROUTE. : auto
Token Ring Source Routing Mode (Only AXIS 640/642)
--- TCP/IP MENU
TCP_ENB. : YES
TCP/IP Protocol Enabled
INT_ADDR. : 192 36 253 80
Internet Address
DEF_ROUT. : 0 0 0 0
Default Router Address (0.0.0.0 for no router)
NET_MASK. : 0 0 0 0
Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
PROS_PRT. : 35
PROS TCP Port Number
PROS_PWD. : netprinter
PROS Protocol Password
LPD_BANN. : NO
LPD Banner Page Disabled
DHCP_ENB. : NO
DHCP Protocol Enabled
BOOTP_ENB. : YES
BOOTP Protocol Enabled
RARP_ENB. : YES
RARP Protocol Enabled
RTN_OPT. : YES
Reverse Telnet Options Enabled
RTEL_PR1. : 0
PR1 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR2. : 0
PR2 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR3. : 0
PR3 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR4. : 0
PR4 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR5. : 0
PR5 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR6. : 0
PR6 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR7. : 0
PR7 Reverse Telnet TCP Port Number (0 for Disabled)
RTEL_PR8. : 0
PR8 Reverse Telnet TCP Port Number (0 for Disabled)