Filter
Top Products
Section 2: Basic Installation
32 AXIS 540/640 User’s Manual
AXIS 640/642 Token Ring Print Server
If you are a IBM AIX user, you will probably not have access to a rarp
daemon. If this is the case, you may use either the arp or bootp
methods instead.
1. Append the following line to your Node Address table. This is
typically performed using the command
/etc/ethers:
Where the node address is either the serial number found on the
underside label of the AXIS 640/642 or a Locally Administrated
Address.
Example:
2. Update your host table and alias name databases, as described
previously.
3. If it is not already running, start the rarp daemon. This is typically
performed using the command
rarpd -a.
4. Restart the AXIS 640/642 to down-load the Internet address.
<node address> <host name>
00:02:31:48:00:61 npsname