Filter
Top Products
Section 7: Setting Up - UNIX
AXIS 540/640 User’s Manual 69
Section 7 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Section 2 - Basic Installation, you are now able to print in interactive
mode using FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 540/640 into your
host spooler you will now need to use the Axis automatic installation
script axinstall. This utility software is resident on the AXIS 540/640
and can be can be up-loaded to your host using FTP, so no disks or
tapes are required. Having completed this operation the printer
connected to the AXIS 540/640 will appear as though it is directly
connected to the host printer spooler.
If you intend to operate your AXIS 540/640 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 3 Setting Up - NetWare
Section 4 Setting Up - Windows
Section 5 Setting Up - OS/2
Section 6 Setting Up - Macintosh
Section 8 Web Based Management
Note: ❏ The script axinstall is not
available in the AXIS 540 and AXIS 542
models. However, this script may be uploaded from any other of
the AXIS print servers and used for configuring these models.
This script can also be downloaded from the AXIS Utilities
diskette or alternatively, obtained via the Axis WWW Home
Page, see Appendix C - Updating the Software.