Filter
Top Products
Section 2: Basic Installation
28 AXIS 540/640 User’s Manual
Notes: ❏ DHCP is only available in “+” and Token Ring models.
❏ Please note that although it is recommended practice to refer to
the host name when accessing your AXIS 540/640, it is perfectly
acceptable to replace this name with the Internet address in all
instances. Indeed, this becomes a necessity when:
• the host name has not been included in your system host table
• attempting to use the arp command in a Windows 95 or NT
environment.
The latter point is demonstrated in the first of the examples below.
Using ARP in Windows
95, Windows NT
In both Windows 95 and Windows NT the Internet address can be set
using the arp method. Perform the following commands to down-load
the Internet address and verify correct Internet communication.
AXIS 540/542 Ethernet Print Server:
Start a DOS window. Type the following command:
Example:
The host will return Reply from 192.168.3.191... or some
similar message. This indicates that the address has been set and the
communication is established.
arp -s <Internet address> <Ethernet address>
ping <Internet address>
arp -d <Internet address>
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d <192.168.3.191>