Filter
Top Products
Section 5: Setting Up - OS/2
58 AXIS 540/640 User’s Manual
About AXIS Print
Utility for OS/2
AXIS Print Utility for OS/2 is a dual purpose application for network
printing in the OS/2 environment. Its fundamental purpose is to:
1. Install and maintain the AXIS 540/640 printer port as an OS/2
printer port.
2. Capture and monitor print jobs directed to the AXIS 540/640
port. Print jobs may be directed through a spool directory either
at your local hard disk, or at the file server. The printer port status
of your AXIS 540/640 may be monitored and pop-up notification
messages can be generated, keeping you informed of completed
print jobs or any problematic condition.
Note: ❏ The NetBEUI protocol must be active. If not, use MPTS/LAPS
(LAN Server) or SETUP (LAN Manager) to activate it.
Install the AXIS
540/640
1. When AXIS Print Utility for OS/2 is running, click Install to
install your AXIS 540/640. It will then appear in the list as
<name>.LP1, where <name> is AX followed by last six digits of
your print server number. e.g. AX100086.LP1. However, this
alphanumeric name will be superseded by any new name given to
your AXIS 540/640 when using AXIS NetPilot.
2. Select the port that you wish to install, then click Install.
Repeat this procedure for each server using the AXIS 540/640.
Note: ❏ The AXIS Print Utility for OS/2 must be running in order to
print using your AXIS 540/640.