Filter
Top Products
Display operation
75
Autoset
The Autoset menu is not available in DVI mode.
When do you need to use the Autoset function?
• The first time you use the display with analog video
connected.
• After connecting or selecting another analog video source
(e.g., changing the PC resolution).
• In case you notice the image geometry or positioning is not as
desired.
Name Description
Full Autoset Perform all Autoset functions (below) one
after another
Automatic Gain Adjust the video levels (black and white)
automatically
Automatic Geometry Adjust the image geometry automatically.
This function displays the complete active
video in the center of the screen.
If the video resolution is smaller than the
native panel resolution and no scaling is
selected (see further), it puts black bor-
ders around the active video window.
If the video resolution is larger than the
native panel resolution and no scaling is
selected, the edges of the image will be
lost.
Automatic Phase Adjust the video sampling phase and fre-
quency automatically. This is necessary
when you notice vertical or horizontal
banding or noise in the image.