Filter
Top Products
Troubleshooting
90
Note: What if the graphic board resolution is too low
Some non-Barco graphic boards (e.g., single-link boards) may
have an insufficiant resolution to drive the display. You can
solve this problem by forcing the graphic board to operate on a
lower vertical frequency. Therefore, proceed as follows:
1. Shut down the PC.
2. In the display OSD, browse to the Settings menu.
3. Select the function Preferred Input Freq.
4. Select 45 Hz as vertical frequency.
5. Exit the OSD.
6. Reboot the computer.
After reboot, the signal from the graphic board should now
be visible on the display.
On a dual-head system,
the images on the left
and right display seem to
be switched
• Switch the video cables at the
display controller or at the display
video inputs
Problem description Possible tests or solutions