Filter
Top Products
Connections
Connections
5975288 BARCOGRAPHICS 8200 110497
7-3
7-3
5975288 BARCOGRAPHICS 8200 110497
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
98 2790
AUDIO
VIDEO/S-VIDEO INPUT
On
On
Video input
Audio input not
available
S-Video input
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
R
G
R
G
VCR S-VHS
Luma/Chroma
RS 232 IN
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0
I
This devic e complies with Par t 15 of the F CC rules. Operat ion
is subject t o following two condit ions :
(1) This device may not c ause harm ful interf erence
(2) This device must ac cept any interfer ence received
including int erference t hat m ay cause undesired operation
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong
source type is displayed, start up the adjustment mode and
select Installation. Select the Input Slots menu. Highlight the
corresponding slot number with the control disk and press
ENTER to change the priority setting. To start up the
Adjustment menu, press ADJUST or ENTER.
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
98 27
AUDIO
VIDEO/S-VIDEO INPUT
On
On
Video input
Audio input not
available
S-Video input
TV tuner, e.g.
TVDM 40 stereo
VCR
Audio amplifier
Composite
Video
R
G
R
G
VCR S-VHS
Luma/Chroma
RS 232 IN
100 - 230 V
9 - 4 A
60 - 50 Hz
RS232 OUT
0
I
This devic e complies with Par t 15 of the F CC rules. Operat ion
is subject t o following two condit ions :
(1) This device may not c ause harm ful interf erence
(2) This device must ac cept any interfer ence received
including int erference t hat m ay cause undesired operation
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong
source type is displayed, start up the adjustment mode and
select Installation. Select the Input Slots menu. Highlight the
corresponding slot number with the control disk and press
ENTER to change the priority setting. To start up the
Adjustment menu, press ADJUST or ENTER.