Filter
Top Products
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
11-5
Random Access Adjustment Mode
11-5
5975288 BARCOGRAPHICS 8200 110497
Edit file
The Edit file menu makes it possible to change the settings of the file
according to the real settings of the connected source. Consult the
source specification before entering the data.
To start up the EDIT menu, push the control disk up or down to select
EDIT in the FILE menu and press
ENTER.
Select with or
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01 1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or ,
<ENTER> to accept
<EXIT> to return.
Select the file which must be edited (mostly the active file) and press
ENTER.
The Edit file adaptation menu will be displayed.
The file name will be displayed in the upper right corner.
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal shift in pixels
Horizontal period in µs (is automatically adapted during the installa-
tion of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the control disk up or
down to select an item. The color of the selected item will change and
follow one of the three methods to change the value.
a. press
ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press
ENTER to activate the digits. Push the control disk to the
right or to the left to select the changing digit. Push the control disk
Edit file
The Edit file menu makes it possible to change the settings of the file
according to the real settings of the connected source. Consult the
source specification before entering the data.
To start up the EDIT menu, push the control disk up or down to select
EDIT in the FILE menu and press
ENTER.
Select with or
then <ENTER>
<EXIT> to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01 1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or ,
<ENTER> to accept
<EXIT> to return.
Select the file which must be edited (mostly the active file) and press
ENTER.
The Edit file adaptation menu will be displayed.
The file name will be displayed in the upper right corner.
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal shift in pixels
Horizontal period in µs (is automatically adapted during the installa-
tion of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of
a file with LOAD)
Active vertical lines
Vertical shift in lines
Interlaced : toggle on/off (is automatically set to its correct position
during the installation of a file with LOAD)
All settings can individually be changed. Push the control disk up or
down to select an item. The color of the selected item will change and
follow one of the three methods to change the value.
a. press
ENTER to activate the digits and enter directly with the
numeric keys on the RCU or local keypad the new value or
b. press
ENTER to activate the digits. Push the control disk to the
right or to the left to select the changing digit. Push the control disk