Filter
Top Products
6. Setup
6.15 Start up
Start up
To start using the DropZone one must define the server (projector/display) to connect to. Several situations are possible.
1. The projector/display to connect to has not yet been declared in the DropZone interface, in that case the projector/display has
to be added to the DropZone list using the Add function.
2. The projector/display to connect to has already been declared in the DropZone, one must then just selected it from the list.
In case the projector/display name is not known, there is a possibility to select the projector.
by its location (only if the location has been specified).
How to open the installation menu ?
1. Click on the arrow to pull down the installation menu.
Image 6-42
Image 6-43
installation menu
How to add a projector to the list ?
1. Click on the three suspension points to open the projector selection dialog box.
Image 6-44
2. Click on the Add button.
A dialogbox is displayed.
Image 6-45
3. Enter the projector name or browse
the network.
4. Click on OK.
5. Enter the Location (optional).
6. Click on Connect.
52
R5976992 ICON H250/400 13/12/2006