Filter
Top Products
7. Advanced
How to reset the lamp runtime ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ toselectthelamptobereset
Image 7-51
7. Press ENTER
A dialog box is displayed
Image 7-52
8. Use ←or →, the numeric keys on the remote, or the keypad to enter the serial number of the new lamp (serial number 0000000
will not be accepted).
7.6.5 Clear lamp error
Lamp error
When a failure of one of the lamps has occurred, a
lamp logo is displayed in the left corner of the screen. This logo will thus always
inform the user on a previous lamp error.
Image 7-53
Once the error has been solved or/and the lamp has been replaced one can remove (clear) the lamp error.
If the error has been cleared wi
thout solving the lamp problem the logo will be shown at next lamp startup (projector startup for
example)
80
R5976992 ICON H250/400 13/12/2006