Filter
Top Products
RLS W12 02/12/2014
24
4.Input & Communication
2.
Counterclockwise rotate the lens to the end then you can follow the forward direction to remove the lens.
CAUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens
before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
Lens focus
Press the button ENTER on the remote control or the projector panel, Choose OSD -> LENS FOCUS , then use the buttons
to adjust the lens' focus (clarity).
—>
Lens Focus : To adjust the lens focus with the RCU press “enter” when the OSD is not active.
Lens zoom
Press the button ENTER on the remote control or the projector panel, Choose OSD -> LENS ZOOM , then use the buttons
to adjust the size of the image that is projected onto the screen.
Original image size
Zoom out Zoom in
Lens Zoom: To adjust the lens zoom with the RCU press “enter” when the OSD is not active