Filter
Top Products
RLS W12 02/12/2014
44
8.Image
8.10 Auto Image
When Auto Image was selected in the OSD menu, press ENTER to execute the automatic image adjustment function.
By executing this function, the projector will resync the image. Use this function when the image source is unstable or when
you notice deterioration in image quality and the projector will automatically adjust the image size, phase and timing. (The
adjustment also applies to PIP input source).
8.11 Color Mode
Select color preset mode fitted for your image.
Bright
Projector optimized for maximum brightness. Select this mode for use in high ambient light conditions
Presentation (default setting)
Projector optimized for balance between maximal brightness and best color performance Select this mode for a controlled
ambient light condition.
Video
Projector optimized for best color performance. Select this mode for a low ambient light condition
RGB Only
Native image performance. Non corrected. Brightness will be less than 50%. Select this mode for native image performance