Filter
Top Products
RLS W12 02/12/2014
36
7.Input
7.2 Input Selection
Use this function to specify the source of image connected to the rear of the projector. For instance, if you have connected
your PC as the video input source, you can choose VGA(RGB-HV/SOG) to be the input for image projection. Options of input
available on the projector include: HDMI, HDBaseT, VGA(RGB-HV/SOG), YUV1(RGB-S), YUV2(RGBHV/YUV2), SDI/
HDSDI/3G.
7.3 Input Configuration
Select Input Configuration from the OSD menu to choose the Custom Color Space of the source signal for HDMI, VGA, and
component connections.
The default setting, Auto, functions as follows:
AUTO
The Auto setting determines the correct color space to use.
YUV HD
For component SDTV and EDTV resolutions, YUV STD is used. For other component video resolutions, YUV HD is used.
YUV STD
YUV STD is used for SDTV and EDTV sources, and YUV HD for all other sources.
RGB-PC
uses RGB color space and sets black at 0,0,0 RGB and white at 255,255,255 RGB.
RGB-Video
uses RGB color space and sets black at 16,16,16 RGB and white at 235,235,235.
7.4 Input Locking
What is possible?
The output signal can be locked on an internal sync signal or on the sync signal of one of the input sources. Or it can follow
the input of the Main window or Pip window. When locked to the corresponding input sync, the output will be shown without
movement artifacts. With locking to a specific input, a set of projectors can be kept in sync, no matter what input image is
shown.
Use this function to specify the frequency of the image input signal. You can let the projector determine the optimal
projection frequency or force the projector to project image at the frequency you specify.
Auto
The preset value for this function is Auto. If you specify vertical refresh frequency from the input device to be between
48~62Hz, the projector will automatically lock the frequency of the input signal so that both signal input and output will be
refreshed at the same frequency in order to achieve optimal image output. If the frequency of the input signal falls between
24~31Hz, the projector will automatically double the vertical refresh frequency. If the frequency of the input signal falls
between 31~48Hz or exceeds 62Hz, the projector will automatically set the frequency to 60Hz.
48Hz, 50Hz, 60Hz
Choose this option to set image output frequency at 48Hz, 50Hz or 60Hz
If you enable PIP, the projector will automatically synchronize the frequency of the PIP input signal with
the main input signal.