Filter
Top Products
RLS W12 02/12/2014
34
6. Introduction the OSD menu
6.1 How to activate the OSD menu
How to make an OSD adjustment?
With the remote control or the local keypad navigate through the OSD until the desired item is selected. Press the or
key until the desired item is reached. Press
or ENTER to finalize the adjustment.
With the local keypad or remote control, press the
or key until the desired value (setup) is reached. Press EXIT to
finalize the adjustment.
Direct adjustment within the menu:
Use the or key to directly adjust the current value.
Or,Via bar scale adjustment :
Once an item is selected, press or ENTER to open the bar scale menu.
Use the or key to adjust the current value. The bar scale will move accordingly.
Press
or ENTER to finalize the adjustment. or,
When the bar scale is displayed, via direct input. Press
or ENTER to activate the input field.
6.2 OSD menu memory
Each menu with sub menus, remembers its last selected sub item even when leaving the menu structure and that as long as
the projector is running. When restarting the projector from stand-by, the menu memory is reset.
After re-opening the main menu and selecting an item, the previous selected sub item of that selected item is highlighted
and can be opened just by pressing
or ENTER.