Filter
Top Products
RLS W12 02/12/2014
32
5. Getting Started
5.7 Adjusting the lens by horizontal and vertical lens shift
There has 2 methods to adjust the lens horizontal and vertical shift. Refer to below message.
•
Press the MENU button on the remote control and choose Alignment -> Lens Control; then use the ▼▲
▲
▼
buttons to
adjust the Zoom or Focus of the lens.
When the OSD is not active, press enter to activate lens adjust
•
Press the ENTER button on the remote control to access Lens Control adjustment screen before pressing ENTER once
again to access the menu and use the ▼▲
▲
▼
buttons to adjust the horizontal or vertical position of the lens.
Press ENTER once to adjust
zoom and focus
Press ENTER once to adjust
zoom and focus with cross
line
Press ENTER once to Adjust
Lines shift with cross line
->
Enter
Enter
->
Enter
->
Enter
Press ENTER again to adjust
vertical and horizontal lens
shift