Filter
Top Products
EN-16
Connecting and Configuring
your Modem Router
EN-16
section
2
1
3
4
5
6
7
8
9
10
Replacing an Existing Modem or Modem Router
Follow these steps if you currently have a
modem or a modem router that you will be
replacing with your new Modem Router
A. Unpack your new Modem Router
from the box and place it next to
your old modem. Raise the Modem
Router’s antennas. Unplug old
modem’s power cord.
B. Locate the cable that connects your
old modem to your computer. Unplug
that cable from your old modem, and
plug it into any yellow port labeled
“to Wired Computers” on the back of
your new Modem Router.
C. Locate the cable that connects your
old modem to the ADSL wall jack.
Unplug it from your old modem and
then connect it to the gray port
labeled “to ADSL” on the back of
your Modem Router.
D. Plug your Modem Router’s power
supply into the black port labeled
“Power” on the back of your
Modem Router.
E. Wait 20 seconds for the Modem
Router to start up. Look at the
display on the front of the Modem
Router. Make sure the “Wired” and
“Modem-Router” icons are lit up in
blue. If they are not, recheck your
connections.
modem
modem router
computer