Filter
Top Products
EN-42EN-41
Using the Web-Based Advanced User Interface
EN-42EN-41
Using the Web-Based Advanced User Interface
Using the Broadcast SSID Feature
Note: This advanced feature should be employed by advanced users only. For
security, you can choose not to broadcast your network’s SSID. Doing so will keep
your network name hidden from computers that are scanning for the presence of
wireless networks. To turn off the broadcast of the SSID, remove the check mark
from the box next to “Broadcast SSID”, and then click “Apply Changes”. The change
is immediate. Each computer now needs to be set to connect to your specific SSID;
an SSID of “ANY” will no longer be accepted. Refer to the documentation of your
wireless network adapter for information on making this change.
Protected Mode Switch
Protected mode ensures proper operation of N1, draft 802.11n-compliant devices
on your wireless network when 802.11g or 802.11b devices are present or when
there is heavy 802.11g or 802.11b traffic in the operating environment. Use
protected mode if your network consists of a mix of Belkin N1 Wireless Cards
and 802.11g or 802.11b cards on your network. If you are in an environment that
includes little to no 802.11g or 802.11b wireless network traffic, you will achieve
the best N1 wireless performance with protected mode OFF. Conversely, in an
environment with HEAVY 802.11g or 802.11b traffic or interference, you will
achieve the best N1 wireless performance with protected mode ON. This will
ensure N1 wireless performance is not affected.
WMM (Wi-Fi Multimedia)
WMM based on 802.11e QoS (Quality of Service) prioritizes important data on
your network such as multimedia content and voice-over-IP (VoIP) so it will
not be interfered with by other data being sent over the network. This feature
requires other wireless devices, such as Wi-Fi phone or wireless laptop, to
support WMM for best results.
Changing the Wireless Security Settings
Your Router is equipped with the latest security standard called Wi-Fi Protected
Access™ 2 (WPA2™) and the legacy security standard called Wired
Equivalent Privacy (WEP). Your Router also supports the Wi-Fi Protected
Setup (WPS) specification, which simplifies the setup of a wireless network.
WPS uses familiar methodologies, such as typing in a Personal Identification
Number (PIN) or pushing a button, to enable users to automatically configure
network names and strong WPA2 data encryption and authentication. By
default, your Router does not ship with security enabled. You may automatically
configure the security settings using WPS. To change the security settings
manually, you will need to determine which standard you want to use. To access
the security settings, click “Security” on the “Wireless” tab.
Using Wi-Fi Protected Setup
WPS uses WPA2 (described below) for encryption. It does not provide additional
security, but rather, standardizes the method for securing your wireless network.