Filter
Top Products
EN-26
Alternate Setup Method
EN-26
section
2
1
3
4
5
6
7
8
9
10
5. Internet-Status Indicator
This indicator is visible in all pages of the Modem Router,
indicating the connection status of the Modem Router. When
the indicator says “Connected” in blue, the Modem Router
is connected to the Internet. When the Modem Router is not
connected to the Internet, the indicator will read “No Connection”
in RED. The indicator is automatically updated when you make
changes to the settings of the Modem Router.
6. Connect / Disconnect Buttons
Use these buttons to manually connect or disconnect your ADSL
connection as needed.
7. Version Info
Shows the firmware version, boot-code version, hardware version,
and serial number of the Modem Router.
8. LAN Settings
Shows you the settings of the Local Area Network (LAN) side
of the Modem Router. Changes can be made to the settings by
clicking on any one of the links (IP Address, Subnet Mask, DHCP
Server) or by clicking the “LAN” quick-navigation link on the left
side of the screen.
9. Internet Settings
Shows the settings of the Internet/WAN side of the Modem Router
that connects to the Internet. Changes to any of these settings can
be made by clicking on the links or by clicking on the “Internet/
WAN” quick-navigation link on the left side of the screen.
10. Features
Shows the status of the Modem Router’s NAT, firewall, and
wireless features. Changes can be made to the settings by clicking
on any one of the links or by clicking the quick-navigation links on
the left side of the screen.
11. ADSL Info
Shows the ADSL line status and transmission rates.
12. Page Name
The page you are on can be identified by this name. This User
Manual will sometimes refer to pages by name. For instance
“LAN > LAN Settings” refers to the “LAN Settings” page.