Filter
Top Products
EN-70EN-69
Using the Web-Based Advanced User Interface
EN-70EN-69
Using the Web-Based Advanced User Interface
The second method is to allow a specific IP address only to remotely
manage the Modem Router. This is more secure, but less convenient.
To use this method, enter the IP address you know you will be
accessing the Modem Router from in the space provided and select
“Only this IP address can remotely manage the Modem Router”.
Before you enable this function, it is STRONGLY RECOMMENDED that
you set your administrator password. Leaving the password empty will
potentially open your Modem Router to intrusion.
Advanced Feature: The “Remote Access Port” option allows you to
configure the desired “Remote Access Port for Remote Management”
feature. The default access port is set to port 80.
Enabling/Disabling NAT (Network Address Translation)
Note: This advanced feature should be employed by advanced users
only. Before enabling this function, MAKE SURE YOU HAVE SET THE
ADMINISTRATOR PASSWORD. Network Address Translation (NAT) is
the method by which the Modem Router shares the single IP address
assigned by your ISP with the other computers on your network.
This function should only be used if your ISP assigns you multiple
IP addresses or you need NAT disabled for an advanced system
configuration. If you have a single IP address and you turn NAT off,
the computers on your network will not be able to access the Internet.
Other problems may also occur. Turning off NAT will not affect your
firewall functions.