Filter
Top Products
EN-36
Using the Web-Based Advanced User Interface
EN-36
section
2
1
3
4
5
6
7
8
9
10
Changing LAN Settings
All settings for the internal LAN setup of the Modem Router can be
viewed and changed here.
1. IP Address
The “IP address” is the internal IP address of the Modem Router.
The default IP address is “192.168.2.1”. To access the advanced
setup interface, type this IP address into the address bar of your
browser. This address can be changed if needed. To change
the IP address, type in the new IP address and click “Apply
Changes”. The IP address you choose should be a non-routable
IP. Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2. Subnet Mask
There is no need to change the subnet mask. This is a unique,
advanced feature of your Belkin Modem Router. It is possible to
change the subnet mask if necessary; however, do NOT make
changes to the subnet mask unless you have a specific reason to
do so. The default setting is “255.255.255.0”.
3. DHCP Server
The DHCP server function makes setting up a network very easy
by assigning IP addresses to each computer on the network
automatically. The default setting is “On”. The DHCP server
can be turned OFF if necessary; however, in order to do so you
must manually set a static IP address for each computer on your
network. To turn off the DHCP server, select “Off” and click
“Apply Changes”.
(1)
(2)
(3)
(4)
(5)
(6)