Filter
Top Products
Introduction
1
12
Wake-On-Ring
This feature allows the system that is in the Suspend mode or Soft
Power Off mode to wake-up/power-on to respond to calls coming
through an internal or external modem. Refer to Wake-On-Ring
Connector in chapter 2 and Resume On LAN/Ring (IRQ/Event
Activity Detect field) in the Power Management Setup section in
chapter 3 for more information.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support
≥
720mA.
Wake-On-LAN
The Wake-On-LAN function allows the network to remotely wake
up a Soft Power Down (Soft-Off) PC. Your LAN card must support
the remote wakeup function. Refer to Wake-On-LAN Connector in
chapter 2 and Resume On LAN/Ring (IRQ/Event Activity Detect
field) in the Power Management Setup section in chapter 3 for more
information.
Important:
The 5VSB power source of your power supply must support
≥
720mA.
Wake-On-PS/2 Keyboard/Mouse
This function allows you to use the PS/2 keyboard or PS/2 mouse
to wake up the system from the S5 state. Refer to Jumper Settings
for Wake-On-PS/2 Keyboard/Mouse in chapter 2 and PS2KB
Wakeup Select (IRQ/Event Activity Detect field) in the Power
Management section in chapter 3 for more information.
Important:
If you forgot the password, you must power-off the system,
unplug the power cord and clear the CMOS data. Follow
the steps in the Jumper Settings for Clearing CMOS Data
section in chapter 2.
The 5VSB power source of your power supply must
support
≥
720mA.