Filter
Top Products
2
Hardware Installation
23
2.5 Jumper Settings for Wake-On-USB 2.0
Keyboard/Mouse (PM11-UL/RAMA only)
2-3 On: Disabled
(default)
1-2 On: Enabled
Wake-On-USB 2.0 Keyboard/Mouse - J13 and J14
The Wake-On-USB 2.0 Keyboard/Mouse function allows you to use
a USB keyboard or USB mouse to wake up a system that is in the
S3 (STR - Suspend To RAM) state. Set J13 and J14 to Enabled only
if you are using this function with a device that is connected to the
USB 2.0 port. Make sure Resume on PCI Event (IRQ/Event
Activity Detect field) in the Power Management Setup submenu of
the BIOS is also set to Enabled.
Important:
If you are using the Wake-On-USB Keyboard/Mouse
function for 2 USB ports, the 5VSB power source of your
power supply must support
≥
1.5A.
If you are using the Wake-On-USB Keyboard/Mouse
function for 3 or more USB ports, the 5VSB power source
of your power supply must support
≥
2A.
123
J14
J13
123
J14
J13
123
J13
J14
Wake-On-USB 2.0
KB/Mouse (J13 and J14)