Filter
Top Products
97
4
Supported Software
4.6 Graphics Drivers
1. Insert the CD that came with the system board package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click VIA VGA Driver.
3. Follow the prompts on the screen to complete installation.
4. Restart the system.
4.7 VIA USB 2.0 Driver (PM11-UL/RAMA only)
If you are using a USB device that is connected to the USB 2.0
port, you must install the VIA USB 2.0 Driver so that the device can
be recognized and configured properly in the system.
To install the driver, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the VIA
USB 2.0 Driver button to install the driver. Refer to its readme file
for instructions on using the driver.
4.8 Winbond Smart I/O Drivers (PM11-UL/
RAMA only)
Install the Winbond Smart I/O Drivers if you are using a Smart
Card, Memory Stick or Secure Digital Memory Card.
To install the driver, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the
Winbond Smart I/O Drivers button to install the driver. Refer to
its readme file for instructions on using the driver.
4.9 Winbond SmartCard Application
(PM11-UL/RAMA only)
If you are using a Smart Card, install the Winbond SmartCard
Application to configure the the card for system security.
To install the application, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the