Filter
Top Products
74
3
Award BIOS Setup Utility
OnChip USB1.1 Controller
This field is used to select the USB 1.1 ports you want Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
USB Mouse Support
This field is used to enable or disable the USB mouse.
IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.
Onboard LAN Boot ROM (PM11-EL/RAMA and PM11-UL/RAMA
only)
By default, this field is disabled. Enable this field if you wish to use
the boot ROM (instead of a disk drive) to boot-up the system and
access the local area network directly.
If you wish to change the boot ROMs settings, type the <Shift> and
<F10> keys simultaneously when prompted during boot-up. Take
note: you will be able to access the boot ROMs program (by typing
<Shift> + <F10>) only when this field is enabled.