Belkin PM11-EC/RAMA Computer Hardware User Manual


 
2
22
Hardware Installation
2.4 Jumper Settings for Wake-On-PS/2
Keyboard/Mouse
Wake-On-PS/2 Keyboard/Mouse - Jumper JP1
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the
PS/2 keyboard or PS/2 mouse to wake up the system from the S5
state. By default, JP1 is enabled. PS2KB Wakeup Select (IRQ/Event
Activity Detect field) in the Power Management Setup submenu of
the BIOS must be set accordingly. Refer to chapter 3 for details.
Warning:
1. If you forgot the password, you must power-off the system,
unplug the power cord and clear the CMOS data. Follow
the steps in the Jumper Settings for Clearing CMOS Data
section.
2. The 5VSB power source of your power supply must
support
720mA.
2-3 On: Enable - 5VSB power
(default)
1-2 On: Disable - VCC power
3
2
1
3
2
1
1
2
3
Wake-On-PS/2
KB/Mouse (JP1)