Filter
Top Products
2
34
Hardware Installation
Pin
1
2
3
4
5
Function
VCC
UP2-
UP2+
Ground
Key
Pin
6
7
8
9
10
Function
VCC
UP3-
UP3+
Ground
Ground
Pin
11
12
13
14
15
Function
Ground
Ground
UP2+
UP2-
VCC
USB 1.1 (J17)
Pin
1
2
3
4
5
Function
5V_Dul
5V_Dul
Data-
Data-
Data+
Function
Data+
Ground
Ground
Key
Ground
Pin
6
7
8
9
10
USB 2.0 (J12)
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a
USB keyboard or USB mouse to wake up a system that is in the
S3 (STR - Suspend To RAM) state.
If you are using this function with a device that is connected to the
USB 2.0 port, you need to configure 2 jumpers. Refer to Jumper
Settings for Wake-On-USB 2.0 Keyboard/Mouse in chapter 2. You
also need to enable Resume on PCI Event (IRQ/Event Activity
Detect field) in the Power Management Setup submenu of the
BIOS.
If you are using this function with a device that is connected to the
USB 1.1 port, you do not need to configure any jumpers. You only
need to enable USB Resume from S3 (IRQ/Event Activity Detect
field) in the Power Management Setup submenu of the BIOS. Refer
to chapter 3 for more information.