Filter
Top Products
85
3
Award BIOS Setup Utility
+3.3V, +5V, +12V, -12V, -5V, VBAT(V) and 5VSB(V)
These fields show the output voltage of the power supply.
Warning_Beep
Set this field to Enabled so that the warning alarm will beep when the
CPUs temperature exceeded the limit set in the CPU Warning
Temperature field.
Note:
The onboard hardware monitor function is capable of detecting
system health conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the mainboard.
Refer to the Hardware Monitor section in chapter 4 for more
information.