Belkin PM11-EC/RAMA Computer Hardware User Manual


 
A
Using the Suspend to RAM Function
99
A.1 Using the Suspend to RAM Function
If you are using the Windows
®
98 operating system, please follow
the steps below.
1. Select Power Management Setup in the main menu screen and
press <Enter>.
2. In the ACPI Function field, select Enabled.
3. In the ACPI Suspend Type field, select S3(STR).
Appendix A - Using the Suspend to RAM Function
4. Press <Esc> to return to the main menu.
5. Select Save & Exit Setup and press <Enter>. Type <Y> and
press <Enter>.
6. Install Windows
®
98 by typing the following parameter. This is
to ensure that the ACPI function is supported.
[drive]:>setup /p j
If you have previously installed Windows
®
98, you need to
upgrade the system in order to support ACPI. Please contact
Microsoft for upgrade information.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off By PWRBTN
Run VGABIOS if S3 Resume
PWR Lost Resume State
IRQ/Event Activity Detect
Enabled
S1(POS)
User Define
Disabled
Disabled
Suspend -> Off
V/H SYNC+Blank
3
Instant-off
Auto
Keep Off
Press Enter
Item Help
Menu Level
↑↓→← Move
F6:Fail-Safe Defaults F7:Optimized Defaults
F1:General HelpEnter:Select
F5:Previous Values
+/-/PU/PD:Value
F10:Save
ESC:Exit
u