Black Box 1-, 2-, and 4-Port Industrial Ethernet Serial Servers Switch User Manual


 
724-746-5500 | blackbox.com
Page 10
724-746-5500 | blackbox.com
Chapter 1: Specifications
1. Specifications
1.1 General
Approvals — FCC, IP30 case
Configuration Options — Console mode: Using RS-232 with VT100
emulation;
Telnet mode: Using HyperTerminal with VT100 emulation;
Serial Server Manager: Windows
®
98/ME/2000/2003 Server/XP, Windows NT, Windows Vista
®
;
Web server: Using Internet Explorer
®
Web browser
Data Rate — 110 bps to 230.4 kbps
I/P Port Addresses — 5300: Heartbeat and Configuration setting in TCP mode (that is, Pair mode);
8888: Serial server update;
8890: Serial server monitor;
8889: Set configuration in UDP mode
Management — Manager, Web Server, Serial Console, Telnet
Memory — Serial: 8 KB per port;
Network: 48 KB
Network Communications — LAN: 10-/100-Mbps Autodetecting 10BASE-T, 100BASE-TX;
RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND;
RS-422: TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GND;
RS-485H: Data+, Data-, GND;
RS-485F: TX+, TX-, RX+, RX-, GND
Operating System — Windows 2000, 2003 Server/XP, 2008, Windows Vista, Windows 7
Optional Accessories — (1) null-modem crossover cable for DTE-to-DTE connection;
(1) 3.2-ft. [1-m] 35-mm steel DIN rail
Protocols — TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
Serial Interfaces — RS-232 (DTE): TXD, RXD, RTS, CTS, DTR, DSR, DCD, GND;
Terminal block (LES401A only): TXD, RXD, RTS, CTS, GND;
RS-422: TXDB(+), TXDA(-), RXDB(+), RXDA(-), RTS(+), RTS(-), CTS(+), CTS(-), GND;
RS-485H: Data B(+), Data A(-) and GND;
RS-485F: TXDB(+), TXDA(-), RXDB(+), RXDA(-), GD;
Baud Rate: 110 bps to 230.4 bps
Parity: None, Even, Odd, Mark, Space
Data Bits: 5, 6, 7, or 8
Stop Bits: 1, 1.5, or 2
User Controls — LES401A: (1) DB9/terminal block switch
Connectors — LES401A: (1) 4-pin terminal block (removable) for DC power, (1) DB9 male, (1) RJ-45 for Ethernet;
LES402A: (2) DB9 male, (1) RJ-45 for Ethernet;
LES404A: (4) DB9 male, (1) RJ-45 for Ethernet
Indicators — Power: Red LED, Link: Yellow or green LED (10BASE-T or 100BASE-TX),
Ready: Flashing green LED
Temperature Tolerance — Operating: +14 to +176° F (-10 to +80° C);
Storage: -4 to +185° F (-20 to +85° C)
Relative Humidity — 5 to 98%