Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 49
Chapter 10: Using Console Mode
Step 6: Once all the changes have been made, move to the Configuration screen, select “Save” and press “Enter.”
Figure 10-2. Saving and restarting the configuration.
The restart message will appear.
Step 7: Select “Yes” to save changes. This is necessary to write the settings to the server.
Using a Password
If a password is used, you must enter it before the Configuration screen will appear. If the server is accessed with a password but
no changes are made, Reset to end before disconnecting.